Speco N64NR, User Manual, Page: 67 / 114

Alarm Management
NVR User Manual
2 Enable or disable “Record”, “Snapshot”, “Push”, “Alarm-out”, “Preset”, “Buzzer”, “Pop-up Video” and “E-mail”. The
alarm handling settings of motion alarm the same as the sensor alarm (see 9.1 Sensor Alarm for details).
3 Click “Apply” to save the settings. You can click “Motion Settings” to go to the motion configuration interface.
9.3 Combination Alarm
① Click Start

Settings

Alarm

Combination Alarm to go to the following interface.
② Customize combination alarm. Set alarm name and click “Configure” under the Combined Alarm Configuration item.
Then select alarm type and alarm source. Finally, click “OK” to save the settings.
③ Enable or disable “Record”, “Snapshot”, “Push”, “Alarm-out”, “Preset”, “Buzzer”, “Pop-up Video” and “E-mail”. The
alarm handling setting of combination alarm is similar to that of the sensor alarm (see
9.1 Sensor Alarm for details).
④ Click “Apply” to save the settings.
9.4 Smart Event
9.4.1 Face Detection
Face Detection : Alarms will be triggered if target people intrude into the pre-defined alarm areas.
1 Click Start

Settings

Camera

Smart Settings

Face Detection to go to the following interface.
60