Live View
Introduction
NVR User Manual
Add Display Mode
Method One:
1
Click “Customize Layout” in the above interface
2
Click
to add a display mode name and then set the screen mode.
3
Add the cameras and adjust the cameras’ display sequence as required.
4
Click
under the display mode list.
Method Two:
1
ClickStart
Settings
System
Basic
Output Settings to go to the interface and then set the screen mode.
2
Double click the camera or camera group in the list to add them to the selected window.
3
Click
to save the current display mode (refer to
for detail configurations). The
display mode will be saved and displayed in the display mode list in the live view interface.
Edit Display Mode
Click “Customize Layout” tab in the live view interface and then select one display mode in the list. Click
to edit
the display mode name; click
to delete the display mode.
5.2.2 Quick Sequence View
You can start quick sequence view if the scheme has not been created. If the scheme has been created, please refer
to
Go to the live view interface and then click
to pop up a little window. Set the dwell time in the window and then
25