80
o
Primary SNTP Server
: Input the NTP primary server address.
o
Secondary SNTP Server
: Input the NTP secondary server address.
o
Time Zone
: Select the time zone.
o
Connection Mode
: Select the connection mode to NTP time server.
SEND E-Mail SETUP
: Sets whether to enable/disable e-mail sending function.
o
SEVER TYPE:
Select GMAIL, HOTMAIL, AOL, YAHOO or MANUAL)
o
MAIL SERVER:
Input the SMTP server name as well as the user ID and password.
o
MAIL PORT:
Mail port setting.
o
SEURE OPTION:
Select a secure mail server connection.
(SSL or TLS)
o
ID :
Email User ID
o
PASSWORD :
Email User Password
o
MAIL TO:
Input the appropriate email address to enable sending e-mail reports
o
MAIL FROM (Return Mail Address)
: Set the source e-mail address to be notified to the
destination.
SEND MAIL TEST
: E-mail settings sent a test mail to the registered account
UNIT NAME
: Name the HS
SYSTEM RESTART :
Restart the system
SYSTEM EVENT NOTIFICATION
Allows the user to set EVENT NOFICIATION ON or OFF
o
HEALTH CHECK
(Allows the user to set MAIL STATUS periodically) : DAILY or WEELY or MONTHLY
o
HDD TEMPERATURE
o
HDD BAD SECTOR
o
HDD ALMOST FULL
o
VIDEO CLIP SETUP: Setting the duration for pre and post recording.
o
EVENTS AND NOTIFICATION
o
HEALTH CHECK / RESTART / SHUTDOWN / PANIC RECORD
Enable Email Notification in the event a problem occurs with the VS.
o
ALARM-IN : Enable Email Notification when the camera detects sensor
o
MOTION DETECTION : Enable Email Notification when the camera detects motion
o
VIDEO LOSS : Enable Email, Beep and Alarm output Notification when the camera signal is
lost.
o
HDD TEMPERATURE :
Enable Email Beep and Alarm output Notification when the HDD
reaches the maximum temperature
o
HDD BAD SECTOR : Enable Email Notification when the HDD has bad sectors.
o
HDD ALMOST FULL : Enable Email Notification when the HDD is almost full.
o
HDD FULL : Enable Email Notification when the HDD is full.
o
HDD FAILURE : Enable Email, Beep and Alarm output Notification when the HDD fails.
