2. Miles/Feet or
Kilometers/Meters Selection
Your SpeedZone P•Brain will record
speed/distance and altitude in either miles
(m/h) and feet (ft) or kilometers (km/h) and
meters (m). Either the left or the right side
button will toggle the display between m/h-ft
and km/h-m. When the desired selection is
displayed press a side button and the top
button simultaneously to enter the date
selection mode.
3. Year and Date Selection
Your SpeedZone P•Brain has a calendar
that includes year, month and day. When the
four digit year indicator is flashing you can
scroll up by pushing the right
side button and down by
pushing the left side button.
When the desired year selec-
tion is displayed press a side
button and the top button
simultaneously. The month
and day display will now begin flashing. Use
the right button to scroll up and the left one
to scroll down. Each push of the side button
will change one day at a time. Hold the right
or left button to scroll through the digits rap-
idly. When the desired selection is displayed
press a side button and the top button simul-
taneously to enter the clock mode.
Note:
If
you selected imperial units during setup, date
will be displayed as mm-dd. If metric units
were selected, date is displayed as dd-mm.
4. Setting the Clock
Your SpeedZone P•Brain has a digital clock.
Upon entering the clock programming mode,
The display will flash either twelve (12hr) or
twenty-four (24hr). Select
between 12 or 24 hour mode
by pressing either the left or
right side button. When the
desired selection is displayed
press a side button and the top
button simultaneously.
5
the current speed. Realign the magnet and
sensor if necessary until the current speed is
shown while the front wheel is spinning.
PROGRAMMING
Before programming, your SpeedZone
P•Brain must be initialized. The easiest way
to do this is to depress all three buttons
simultaneously for 3 seconds.
Note:
You
cannot enter Program Mode while in Data
Collection Mode (Data Collection mode is on
when this icon appears on the screen).
If Data collection mode is on, press the top
button once to turn it off. You can also ini-
tialize it by depressing the AC button on the
bottom of the SpeedZone P•Brain (by insert-
ing a small object, such as the tip of a ball-
point pen, into the hole labeled “AC”), or
by removing the battery for 60 seconds. The
SpeedZone P•Brain will then automatically
enter the program mode.
1. Beep ON/OFF selection
You can select if you would like your
SpeedZone P•Brain to give you an audible
beep when you are above or below your
target heart rate and every time you press
one of its buttons. Either the left or the right
side button will toggle the display between
ON BEEP and OFF BEEP. When the desired
selection is displayed press a side button
and the top button simultaneously to enter
the miles/kilometers selection mode.
4
1
∑
A
M
DST
DST
ODO
ODO
1
∑
A
M
DST
DST
ODO
ODO