7
30.
Remove the plastic protector from the front wheel
hub.
Make sure the hub spacer is not stuck
in the wheel protector. If so replace the
spacer in the hub before installing the
wheel.
31.
Using the corresponding hex key, remove the thru-
axle from the fork.
32.
Install the front wheel into the fork ensuring the
disc brake is located between the brake pads in the
caliper.
33.
Lightly grease the shaft of the thru-axle and slide it
through the fork from the left (non-drive) side of the
bicycle.
CAUTION: Do not grease the threads on
the thru-axle.
34.
Using a torque wrench and corresponding hex bit,
tighten (clockwise) the thru-axle to the specified
torque setting found on the axle and/or in the user
manual.
31
32
30
33
34
