15
USER GUIDE 2.0
2.1. LIFTING & HANDLING THE CLIENT IN & OUT OF THE 3D MODULAR SYSTEM
Most
•
users of 3D Modular Systems will need to be hoisted into the equipment.
Manually lifting the client is not recommended, however with some clients it may not
be possible to hoist them safely by conventional means and in instances such as
this you are recommended to carry out a
‘RISK ASSESSMENT’
to assess the risks
involved in any such action.
It
•
is important that all carers are aware of the Health & Safety guidelines for
‘Lifting
and Handling’
.
Before
•
lifting the client make sure all straps are placed out of the 3D Modular System.
This will avoid the straps becoming trapped under the client when seated.
When
•
using the hoist, make sure that you follow the
hoist manufacturers
instructions
regarding correct use.
On
•
lowering the client into the 3D Modular System make sure that the client’s hips /
pelvis are located as far back as possible into the seat.
Leaving
•
the hoist sling in the 3D Modular System once the client has been placed
is not recommended as this could cause discomfort and pressure areas to be
generated. However, if any management issues require the sling to be left in situ
then it is recommended that the most appropriate sling be used. If you require further
information regarding this, contact your local Wheelchair Service Therapist.
Please
•
note, that it is very important that the client is correctly positioned to
give maximum comfort and support.
