4
A.
Remove the entire seat from base. (Refer to Procedure
1
)
B.
Remove desired 4-Bar Bolt. (Refer to Procedure
2
)
3. Assist Piston Replacement
C.
Use pry tool to release one piston head from ball joint by slightly lifting the retaining band as
show below (do not completely remove retaining band). (Requires: Pry Tool)
D.
Repeat step
C
on the other release-head to remove piston. (Requires: Pry Tool)
E.
Attach new piston at lower ball joint by snapping head onto ball (piston head down). (No tool
required)
3.C
3.B
