10
G
Rotate back off the pedal to line up the mounting holes on the canister end to the release-head
end.
H.
Lock the pedal with the Lift Lock Pin and depress the pedal. If the piston releases despite the
lock being engaged, stop immediately and turn the piston back about ½ turn and test again. The
pedal should not wobble in place, but also be lose enough to the pin that it cannot engage the
piston with the lock in position.
I.
Once desired piston behavior is met back the jam-nut into the release-head to lock position.
(Requires: 14mm Crescent Wrench)
J.
Turn canister of piston to align both mounting holes if they do not already. Turning the canister
should not turn the stem if jam-nut is secured properly.
K.
Reattach mounting bolts to the yoke to secure the piston in place. (Requires: 4mm Allen, 10mm
Crescent Wrench)
6. Lift Piston Replacement and Calibration (cont.)
