Selector™ Diffuse Reflectance Accessory
5
2. Unpacking and Checklist
On receipt of your Selector™ accessory please check that the
following have been supplied: (The Selector™ accessory will be
supplied in its own carry case.)
1 Selector™ optical unit assembly in left to right or right to left
beam direction configuration.
1 Selector™ baseplate fitted with 4 support posts in left to right or
right to left beam direction configuration (for your make and model
of spectrometer)
1 Sample holder post (already fitted to the Selector™ baseplate on
some versions – simply screws into position).
1 Micro sample cup (4mm dia x 2.5mm deep).
2 Standard sample cups (11mm dia x 2.5mm deep).
1 Tilted cup. (For total reflectance measurement.)
2 Abrasive sampler (diabraze pad) mounts.
1 Packet of self-adhesive diabraze pads (20pads - 12mm dia).
1 Extended ‘T’ bar Allen key.
1 Allen Key 1.5mm A/F
1 Allen Key 2.0mm A/F
1 “Tommy Bar” (metal rod) for mirror adjustment
Baseplate fixing screws and washers (where necessary).
Carefully remove the Selector™ optical unit assembly, its baseplate
and associated components from the carry case in preparation for
installation into the spectrometer.
