Spearhead RC 132, Handbook & Parts Book

Page: 37 / 76

Spearhead RC
132/162
37
MAINTENANCE
The rotary head must only be used, maintained and serviced by authorized and
educated personnel. Area of responsibility, qualifications and supervision of personnel
must be carefully regulated by the head of operations. If personnel do not meet these
terms they must be trained and instructed.
Head of operations must also make sure that the content of the manual is understood
and implemented.
Maintenance procedures not mentioned in this manual must only be carried out by
authorized repair shops.
Bypassing the safety advice in this manual may result in endangering persons, the
environment and/or the tool.
Bypassing the safety advice may result in all compensations claim being
repealed.
To be exact bypassing the safety advice may result in:

Endangering persons at non-secured work areas!

Malfunction of important machine functions!

Malfunction of prescribed methods for maintenance and service!

Endangering persons following mechanical or chemical impact!

Endangering the environment following a hydraulic oil leak!
Only carry out service with machine shut off. The procedure for stopping the machine
as described in Spearhead’s manual must be followed.
When carrying out maintenance on a lifted head and/or machine, secure with suitable
support elements.
When changing heads with blades, always check the hydraulic system for remaining
pressure. If present reduce to zero.
Only use suitable tools and wear work gloves, safety shoes and safety glasses.
Dispose of oil and grease according to regulations.
Directly after finishing work, all safety and protection mechanisms must be remounted
and reactivated.