Spearhead RC 132, Handbook & Parts Book

Page: 19 / 76

Spearhead RC
132/162
19

Use clear warning signs to alert others to the type of machine working in the
vicinity. Signs should be placed at both ends of the work site and should be in
accordance with the Department of Transport recommendations.

Ensure cutting blades are of the type recommended by the manufacturer, are
securely fitted and are undamaged.

Ensure hydraulic pipes are correctly routed to avoid damage from chafing,
stretching, pinching or kinking.

Disengage the machine, stop the engine and remove the key before leaving the
tractor cab for any reason.

Clean up any debris left at the work site.

Ensure that when you remove the machine from the tractor it is secured in a
safe position using stands provided.
Never

Never operate the machine with other people present, as it is possible for
debris, including stones, to be discharged from the front and rear of the head.
WA
RNING: Some cutting heads may continue to ‘freewheel’ for up to 20
seconds or more after being stopped.

Never operate the machine until you have read and understood the relevant
handbook and are familiar with the controls.

Never use a machine that is poorly maintained or has guards that are damaged
or missing.

Never allow an inexperienced person to operate the machine without
supervision.

Never use/
fit a machine onto a tractor if it doesn’t meet the manufacturer’s
specification.

Never use a machine if the hydraulic system shows signs of damage.

Never allow children to play on or around the machine at any time.

Never attempt any maintenance or adjustment without first disengaging the
PTO, lowering the head to the ground, stopping the tractor engine and applying
the tractor parking brake.

Never leave the cab without removing the ignition key.

Never operate the tractor or any controls from nowhere other than driving seat.

Never stop the engine with the PTO engaged.

Never operate with blades missing.

Never operate PTO above recommended speed, 540 RPM.

Never operate with wire around any rotor. Stop immediately.

Never use the head at any angle, which may throw debris towards the cab.

Never attempt to use the machine for any purpose other than what it was
designed for.

Never transport with PTO engaged.

Never enter the working area of the machine (risk of injury!).

Never transport with the controls live, always turn off the isolator switch (red)
and disconnect supply.

Attempt to detect a hydraulic leak with your hand; use a piece of card.