12
Q2000HD, Q2500HD & Q2800HD Flail mower
Spearhead
Rotor Care
Rotor Care
operate at correct PTO speed, 540/1000r.p.m.
Always
inspect the condition of flails, bushes and bolts on a very regular basis.
Always
replace bolts, nuts and bushes when replacing flails.
Always
use genuine flails bolts, nuts and bushes. The flails and bolts are made to a very high
standard from a high tensile steel, being fully heat treated and subjected to rigorous
testing in very stringent conditions to comply with our rigid quality control requirements.
Never
operate with bolts loose or flails missing.
Never
change to a different spec or type of flail, this will immediately put the rotor out of
balance.
Never
engage rotor at high PTO speeds.
Warning
Rotor is balanced to be run at PTO speed. Do not operate above or
below this speed (optimum rotor speed 2200rpm).
Remember, the rotor is highly complex and expensive to manufacture,
please treat with care and enjoy the benefits of the Spearhead Rotor.
Never carry out any servicing or maintenance work without first
disengaging the PTO and stopping the tractor.
