Spearhead Q1200-OS, Handbook & Parts Manual

Page: 6 / 45

Spearhead OFFSET FLAIL MOWER
6
Introduction
The Spearhead Q120-OS, Q160-OS and Q200-OS are robust high capacity flail
mowers that are easy to operate and maintain, but to ensure trouble-free operation
this manual should be carefully studied.
Safety First
Do not start the machine until you fully understand operation and safety precaution
requirements.
Tractor Requirements

Spearhead strongly recommends using a 60+HP tractor for 1.2m, 80+HP
tractor for 1.6m and 100+Hp tractor for the 2.0m

with CATEGORY 2 front or rear linkage.

Minimum tractor weight including ballast must be 2500kg.

PTO must be independent live drive to enable continuous PTO drive even
when tractor clutch is pressed down.

Before hitching, ensure position control is selected. Do not attempt to hitch in
draft control.

Check chains and stabilizers must be in good working order to hold the
machine firmly. Do not operate without checking that chains and stabilizers
are tight.

Spearhead particularly recommend ‘turn buckle’ type check chains.

Set linkage lift rods to an equal length.

Two double acting spool are required.

Clockwise rotating tractor PTO as standard, anti-clockwise available as an
option.