background image

Spearhead OFFSET FLAIL MOWER 

 

 

 

4

 

 

 
 
 
 
 
 
 

 
 
 

  Never operate the machine with other people present, as it is possible 

for debris, including stones, to be discharged from the front and rear of 
the flail hood. 

  Always ensure all cab safety guards are in place and all tractor 

windows closed. 

  Never allow an inexperienced person to operate the machine without 

supervision. 

  Never allow children to play on or around the machine at any time. 

  Never attempt any maintenance or adjustment without first disengaging 

the PTO, lowering to the ground, stopping the tractor engine applying 
the tractor parking brake and on level ground. 

  Before leaving the tractor cab always ensure that the machine is firmly 

on the ground, and the rotor has stopped spinning. 

  Never stop the engine with the PTO engaged. 

  Always check that all guards are properly fitted, check there are no 

damaged or loose parts. Particular attention should be given to the 
flails to ensure they are not damaged, cracked or missing. 

  Never operate with flails missing. 

  Always operate PTO at recommended speed 540/1000 R.P.M. as 

indicated on the decal. 

  Always inspect work area for wire, steel posts, large stones and other 

dangerous materials and remove before starting work. 

  Never operate with wire/debris around rotor. Stop immediately. 

  Never attempt to use the machine for any purpose other than that it 

was designed for. 

  Ensure that all warning labels are always visible and that they are not 

damaged, defaced or missing. 

  Never transport with the PTO engaged. 

  When parking up, always lower to the ground 

 
 

 
 
 
 
 
 

 

 
   

Safety  

 

 

Summary of Contents for Q1200-OS














































Reviews: