Spearhead Outfront Flail 130, Handbook & Parts Manual

Page: 7 / 49

Spearhead Outfront Flail
7
Machine Description
Intended usage.
The Outfront flail was developed to meet the demands of local authorities for parks and
municipal areas. The Outfront is provided in optional cutting widths of 1.3m and 1.6m,
variable cutting heights from 8mm to 130mm, a mountable kerb height of 355mm, sealed
bearings and pressed scoop flails. The 130 model weighs 245Kg and the 160 model weighs
295Kg.
The machine incorporates castor wheels at the front, an adjustable roller at the back, and a
rotating flail shaft in between.
The rotor is driven via the tractor’s (front output) PTO shaft.
The Outfront was designed to be front mounted and for use on level or slightly undulating
ground, cutting verges and boundaries with vegetation height of up to 60cm, and thickness
up to 10mm.
Spearhead Outfront Flail
Machine layout conventions.
The layout and naming convention used throughout this manual are shown in Figures 1.2.1
and 1.2.2 across.