Spearhead MULTICUT
820
16
Servicing & Maintenance
Daily
Grease all grease points, including rear axle pivot points (Fig. 9a), axle hinge
(Fig. 9c), wheel arms (Fig. 9b), and front draw bar pivot (Fig. 9f).
Check bolts are tight on all gearboxes.
Check condition of blades and blade bushes ensure all retaining bolts are
fully tight.
Check wheel nuts are tight.
Check tyre pressures - 60 P.S.I
Check gearbox oil, replenish with EP90 gear oil as necessary to the correct
level line on the dipsticks provided with each gearbox.
Fig.9. Greasing points
A. Rear axle pivot point.
B. Wheel arm pivot point.
C. Axle adjuster.
D. Height stop.
E. Hydraulic rams
F. Drawbar
G. Drive shaft
H.
Wheel bearings