Spear SOCOM X, Instruction Manual, Page: 7 / 22

Setting Up the Control Module
1.
First, ensure that there are no cracks or debris in any of the connection ports on
the control module
2. Unscrew the battery cap by turning the battery cap counter clockwise
3. Ensure that there are two CR-123A batteries inside with the positive side (side
with a bump) of the battery facing down
4. Ensure there is no debris in the battery area or on the bottom of the battery cap
5. Make sure the rubber gaskets are still on the cap to prevent water from getting
inside the Control Module
6. Replace battery cap on control module and tighten it by turning clockwise
U
SI
N
G
Y
O
U
R
SO
CO
M
-X
BATTERY CAP, ON/OFF
COMMUNICATION INPUT CONNECTIONS ON
BOTTOM OF CONTROL MODULE
HEADSET CONNECTION
PUSH-TO-TALK
BUTTONS