Spear SOCOM X, Instruction Manual, Page: 12 / 22

Using the Hearing Enhancement Amplitude Reduction System (H.E.A.R.S.)
1.
After completion of the previous steps i.e. setting up the Control Module,
Headset and P.A.C.S., you can now turn on the control module by firmly
depressing the battery cap until it clicks
2. You will hear beeps to indicate the battery life
a. One Beep – batteries are full
b. Two Beeps – batteries are half full
c. Three Beeps – batteries need to be replaced (H.E.A.R.S. is disabled)
3. To increase the sensitivity of H.E.A.R.S. (increasing hearing ability) press and
hold button on the front part of the right H.E.A.R.S. block (when microphone is
on the left of the user, if mic is on right, it is the back button), to decrease
sensitivity press/hold button on the rear part until desired level is achieved
(Image 1)
U
SI
N
G
Y
O
U
R
SO
CO
M
-X
INCREASE
SENSITIVITY
OF H.E.A.R.S.
DECREASE
SENSITIVITY
OF H.E.A.R.S.
IMAGE 1