Spear SOCOM X, Instruction Manual, Page: 13 / 22

Connecting the Communication Cord Sockets
1.
The communication cord sockets should be inspected for damage and ensure
that there is no debris at the connector of the cord or in the connection point
on the Control Module (Image 1)
2. Determine which communication devices you want on which channel (either
COM1, COM2, or Auxiliary)
1. NOTE: The USB Connector, Audio Accessory Cable, and Cellular Phone Cables
must be plugged into the Auxiliary Cable to work properly
3. Once the cables are selected, plug cable into the selected port (COM1, COM2,
or Auxiliary) by lining up white dots on both the cable and the port (Image 2)
4. Follow the steps for the subsequent sockets and perform communication
checks as necessary
IMAGE 2
IMAGE 1
U
SI
N
G
Y
O
U
R
SO
CO
M
-X