background image

18

19

AFTER SALES SUPPORT 

0345 605 2067  

  

AFTER SALES SUPPORT 

0345 605 2067

16

8

17

18

1

2

3    

4

6

10

7

15

9

5

11

13

14

12

SAFETY INFORMATION

Please read these instructions fully before operating or maintaining your machine

INTENDED USE

This cordless chainsaw 

(hereinafter productor “ 

power tool”) is designed 

for cutting wood only.The 

product is not designed 

for any other types of 

application (e. g. cutting of 

brickwork, plastic or food).
The product is to be used 

by adults. Children under 

the age of 16 may not 

use the tool except under 

supervision.
Any other use or 

modification of the 

product are considered 

improper use and can 

result in hazards such 

as death, life-threatening 

injuries and damage. The 

manufacturer is not liable 

for any damages caused 

by improper use. The 

product is not intended for 

commercial use or for any 

otheruse.
Do not use and store the 

power tool in rain or wet 

conditions.
Observe all applicable 

local safety regulations, 

standards and ordinances. 

The use of noise emitting 

power tools may be 

restricted to certain 

times by national or local 

regulations.

BOX CONTENTS

PARTS

If there are any parts missing, please call the customer helpline on 0345 605 2067

Rear handle
Oil tank cap
Front guard / chain brake
Guide bar
Saw chain
Lock knob / Chain tension knob
Drive cover
100ml lubrication oil
Rear guard

1

11

10

2

12

3

13

4

14

5

15

6

16

7

17

9

8

18

1

2

3

4

5

6

7

8

9

10

11 12

13

14

15

16

17

18

Spiked bumper
Front handle
Motor housing
On / off switch
Lock-off button
Oil level indicator
Guide bar cover
Battery pack X2
Charger

Summary of Contents for S3635CC























Reviews: