AFTER SALES SUPPORT
0345 605 2070
25
MAINTENANCE
Care of guide bar
Flip the bar
Wear gloves.
• Unplug the chain saw.
• Loosen the side cover release knob slightly, but do
not remove the side cover.
• Loosen the chain tensioning ring (turn it counter
clockwise) as far as it will go.
• Loosen the side cover release knob and remove
the side cover.
• Remove the bar and chain and inspect for damage
and wear.
• Remove the screw from the back side of the chain
tensioning gear and remove the chain tensioning
gear from the guide bar.(Fig.9)
• There is a rubber washer that is important to the
function of the chain lubrication. The rubber washer
must be in place around the pin on the tensioner
before the tensioner is screwed onto the bar
