AFTER SALES HELPLINE
03456 052 068
6
when the product is
running. Only remove
trimmings when the
product is switched off
and disconnected from the
power supply.
• Check for damaged parts.
Before further use, carefully
check the tool for damage.
Check for alignment of
moving parts, binding of
moving parts, breakage of
parts, mounting and any
other condition that may
affect its operation. Do not
use the tool if any parts
are damaged or defective.
Have any damaged or
defective parts repaired or
replaced by an authorized
service agent. Never
attempt any repairs yourself.
• Store idle tools. When not in
use, tools should be stored
in a dry, locked-up place
out of reach of children.
• Maintain tools with care.
Keep tools clean and in
good condition for better
and safer performance.
Follow the instructions for
maintenance and changing
accessories. Keep handles
and switches dry, clean and
free from oil and grease.
SAFETY INFORMATION
PERSONAL SAFETY
• Stay alert, watch what
you are doing and use
common sense when
operating a power tool. Do
not use a power tool while
you are tired or under the
influence of drugs, alcohol
or medication. A moment of
inattention while operating
power tools may result in
serious personal injury.
• Use personal protective
equipment. Always wear
eye protection. Protective
equipment such as dust
mask, non-skid safety
shoes, hard hat, or hearing
protection used for
appropriate conditions will
reduce personal injuries.
• Prevent unintentional
starting. Ensure the switch
is in the off-position before
connecting to power source
and/or battery pack, picking
up or carrying the tool.
Carrying power tools with
your finger on the switch or
energising power tools that
have the switch on invites
accidents.
• Do not overreach. Keep
proper footing and balance
at all times. This enables
better control of the
power tool in unexpected
