AFTER SALES HELPLINE
03456 052 068
19
OPERATE
30
o
Trimming
i. Ensure the knife protector label is removed before use.
Ensure you wear gloves when removing this label.
ii. Adjust the trimmer head angle to a proper position for
trimming operation.
iii. Hold the grass trimmer firmly, keeping your balance with
feet slightly apart. Alter the height of the product if needed
to ensure an upright posture.
iv. Hold the trimmer head just above the ground at an angle
of approximately 30°.
v. Move the product slowly from side to side in a swinging
motion.
vi. Ensure the cutting device remains clean and free from
off-cuts that may cause it to jam. Check regularly. Release
the on/off switch and take the battery pack off before
checking.
Switching on/off
i. Push safety switch, and press the on/off switch to turn the
product on.
ii. Release the on/off switch to turn the product off.
Automatic line feeding
The equipment features a fully automatic single line system.
The lines will automatically elongate every time you turn on
the appliance. To support proper line elongation, ensure that
the coil has stopped moving completely before turning on the
appliance again.
The lines are automatically cut to the correct length by the line
cutter.
1
2
