AFTER SALES HELPLINE
03456 052 068
15
ASSEMBLE
4
5
Front handle assemble
i. Loosen the knob and remove it together with the bolt from
the front handle.
ii. Align the front handle to the housing and place it onto it.
iii. Insert the bolt from the right through the opening, ensure
that the bolt head sits properly then tighten the knob.
Preparation:
The charging process starts as soon as
the mains plug of the battery charger is plugged into a
mains socket and the battery is inserted into the charging
compartment.
If the battery is not inserted, a continuous red light indicates
that the mains plug is plugged into a mains socket and the
battery charger is ready for operation.
Charging: a flashing green LED
on the charger indicates that
the battery is charging normally.
Charged: continuous green LED
on the charger indicates
that the battery is ready for use.
The indicator lights on the charger show the charger status:
Charging the battery
i. Plug the charger into an appropriate AC power outlet.
ii. Install the battery on the slot of charger.
Symbol
Indicator lights
Status
red, flashing
technical issue see
instructions below
red, continuous
connected to
power supply
green, flashing
charging
green, continuous fully charged
