34
www.SpeakerCraft.com
INSTALLATION
SPEAKER WIRE CONNECTIONS
CAUTION!
ALL SPEAKER WIRE CONNECTIONS MUST BE MADE
WITH THE AMPLIFIER OFF.
Bare Wire
Unscrew the red or
black plastic knob,
insert the bare wire
end into the opening,
and then tighten the
knob until the wire is
securely clamped
Banana Plugs
There are many types
of banana plugs, some
crimp, some solder. The
SpeakerCraft gold banana
plug has 3 quick-connect
binding posts for the bare
wire on the body of the
plug. A banana plug is
simply inserted into the
jack at the end of the
amplifier’s binding post.
STEP
DESCRIPTION
1. Label all wires.
If you label the wires for their destination, rather than which
terminal of the SC16-50 they are connected to, it will be easier
to reconfigure your system in the future.
2. Connect one stripped wire end or banana
plug to the black terminal and one to the
red terminal. CAUTION- Avoid having even a
single strand of wire touching the chassis or
another connector.
A. Split the speaker wire insulation so that at least two inches
of each conductor are separated.
B. Strip one half inch of insulation from the end of each
conductor of the speaker wire
C. Attach banana plugs or twist the strands of wire together
and insert them into the appropriate binding post.
