17
SpeakerCraft – 1-800-472-5555 – 1-707-778-5733
16 CHANNEL, FULLY CONFIGURABLE POWER AMPLIFIERS
CONFIGURING YOUR SYSTEM
The SC16-50 includes a Configuration and Setup Tool that provides easy access
to the essential features of the amplifier using the web browser on a laptop, PC,
iPad, tablet or smartphone (e.g. Internet Explorer, Firefox, Chrome, Safari, etc.).
CONNECTING FOR CONFIGURATION
A direct wired Ethernet connection or a Local Area Network (LAN) connection
to the RJ-45 network connector on the rear panel of the SC16-50 is necessary
to access the SC16-50 Configuration and Setup Tool using a web browser.
Note:
Before you attempt to connect your SC16-50 to a LAN, it is highly
recommended that you first connect to the SC16-50 using the Direct Ethernet
Connection method below to change its IP address to an available static IP
address for your network.
DIRECT ETHERNET CONNECTION
A direct Ethernet connection is made by connecting the RJ-45 network
connector of a PC directly to the RJ-45 network connector on the rear panel of
the SC16-50. Use the numbered steps below to establish network communication
between a PC and the SC16-50 when using a direct wired Ethernet connection.
Any device connecting to the SC16-50 using a Direct Ethernet Connection needs
to have its network set to a static IP address of 192.168.1.x, with the exception
of 192.168.1.1.
Note
: A crossover network cable is not required when using a direct, wired
Ethernet connection as the SC16-50’s network connector is auto sensing.
Windows XP
1. Select Windows Control Panel > Network Connections.
2. Right click ‘Local Area Network’ and select properties.
3. Highlight Internet Protocol (TCP/IP) in the connections list and then select properties.
4. Set a unique IP address compatible with the factory
default IP address http://192.168.1.100 (e.g 192.168.1.220)
5. Set Subnet to 255.255.255.0
Windows Vista 7
1. Select Windows Control Panel > Network and Internet > Network and Sharing Center.
2. Select Change Adapter Settings.
3. Right click Local Area Connection and select Properties.
4. Highlight Internet Protocol Version 4 (TCP/IPv4) in the connections list and then select Properties.
5. Set a unique IP address compatible with the factory default IP address
http://192.168.1.100 (e.g 192.168.1.220)
6. Set Subnet to 255.255.255.0
