MZC-64 FEATURES-FRONT PANEL
1. ZONE STATUS LED Indicators and Labels –
Four,
green LEDs indicate the zones that are currently active. Indented spaces
accept adhesive backed labels for zone/room identification. A sheet of descriptive labels, typical of room or area names
used in homes, is included.
2. MASTER POWER Switch –
When pressed to the in position, the MZC-64 is placed in the power ON standby condition,
permitting individual zones to be turned ON and OFF by keypad or touch panel commands. In the OFF (out) position, power
from the AC mains is completely turned off.
3. Red Indicator LED –
Indicates when the Master Power switch is in the depressed position and that power has been applied
from the AC mains.
MZC-64 FEATURES-REAR PANEL
SOURCE 1
OUT
IR
LOOP
L
R
INPUTS
LOOP
L
R
PRE-OUT
VC
NVC
IR OUT
KEYPAD
SPKRS
+ L -
- R +
ZONE 1
SOURCE 2
OUT
IR
LOOP
L
R
INPUTS
LOOP
L
R
PRE-OUT
VC
NVC
IR OUT
KEYPAD
SPKRS
+ L -
- R +
ZONE 2
SOURCE 3
OUT
IR
LOOP
L
R
INPUTS
LOOP
L
R
PRE-OUT
VC
NVC
IR OUT
KEYPAD
SPKRS
+ L -
- R +
ZONE 3
SOURCE 4
OUT
IR
LOOP
L
R
INPUTS
LOOP
L
R
PRE-OUT
VC
NVC
IR OUT
KEYPAD
SPKRS
+ L -
- R +
ZONE 4
SOURCE 5
OUT
IR
LOOP
L
R
INPUTS
LOOP
SOURCE 6
OUT
IR
LOOP
L
R
INPUTS
LOOP
CONTACT CLOSURE
EXPANSION PORTS
RS232
DATA I/O
PHONE (PAGE IN)
DOORBELL/STATUS IN
1
2
CONTROL
PORT
FIRMWARE
UPGRADE
OFF
ON
COMMON
IR OUT
LO
HI
COMMON
STATUS OUT: 0 to +12
MZC-64
120V 60Hz 1.8A~
FUSE: T5AL 250V
MZC-64
ZONE STATUS
MASTER POWER
1
2
3
4
2
1. CONTACT CLOSURE –
One, single pole dry relay contact used to activate any device that can be controlled or triggered by
a switch closure. The closure can be programmed within EZ-Tools for Momentary, Toggle and Open/Close Paired operation.
Spring loaded terminals accept wire sizes from 28 to 14 AWG. Internal relay contacts are rated at 2A/30V AC or DC.
2. EXPANSION PORT/LOOP –
Two, RJ45 jacks primarily used for looping system data to multiple MZC-64’s in expanded systems.
These jacks can also be used for connection of specialized RS485 controlled products such as the SpeakerCraft MODE
Adapter/Base for adding iPods and SpeakerCraft RSA-1.0(s) for control of multiple RS32 devices.
1
2
3
1
2
3
4
5
6
7
8
9
10
11
13
12
14
15
16
17 18 19
20
