This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method (e.g. photocopying, microfilming or capturing in
electronic data processing systems) requires prior written approval from the publisher. Reprinting, also in part, is
prohibited. This publication reflects the technical state at the time of printing.
Copyright 2020 by Conrad Electronic SE.
*2254843_v2_0720_02_jh_m_en
HDMI Switching
a)
Connecting input and output
HDMI cables:
Always use high-quality HDMI cables.
The transmission quality depends on the quality and length of HDMI cables.
1. Turn off all the devices that you want to connect to the product.
2. Connect the input/playback devices.
-
HDMI:
Connect playback devices (e.g. satellite receiver, DVD player or game console) to
the HDMI input sockets
(7)
, using suitable HDMI cables (
max. 3 m
).
-
USB:
Connect a smart device or similar to the USB-C
TM
input socket
(1)
, using a suitable
USB-C
TM
cable.
The USB-C
TM
cable must at least meet the
USB3.1 Gen 1 (5 Gbps)
specification.
3. Connect the output device (e.g. HDTV or HDMI display) to the HDMI output socket
(6)
using
a using suitable HDMI cable (
max. 3 m
).
b)
Operating the switch
1. Connect the microUSB plug of the power adapter cable to the power input socket
(5)
.
2. To turn the switch on, insert the power adapter mains plug into a suitable mains socket.
- the power LED
(3)
lights up.
- the input channel LED
(2)
of the currently selected input channel flashes.
3. Turn on the playback device(s).
4. Turn on the output device (TV set, monitor).
5. Press the
SELECT
button
(4)
to select an input channel.
The corresponding input channel LED indicates the transmission status:
- the LED is lit solid when the output device receives the signal.
- the LED flashes as long as the output device does not receive the signal.
6. After use, turn the switch off by disconnecting the power adapter from the mains.
Charging
You can charge a device connected to the USB-C
TM
input socket.
When playing back from the device connected to the USB-C
TM
input socket it may
be charged at the same time.
1. Connect the device you intend to charge to the USB-C
TM
input socket
(1)
.
2. Connect the microUSB plug of the power adapter cable to the power input socket
(5)
.
3. To start charging, insert the power adapter mains plug into a suitable mains socket.
4. When charging is complete, disconnect the device from the USB-C
TM
input socket.
5. Turn the switch off by disconnecting the power adapter from the mains.
Care and Cleaning
•
Always disconnect the product from the power supply before cleaning it.
•
Never use aggressive detergents, rubbing alcohol or other chemical solutions as these can
damage the housing or impair the product function.
•
Use a dry, lint-free cloth to clean the product.
Disposal
Electronic devices are recyclable waste and must not be placed in household
waste. At the end of its service life, dispose of the product according to the relevant
statutory regulations.
You thus fulfil your statutory obligations and contribute to protection of the
environment.
Technical data
a)
General
Input voltage ................................. 5 V/DC
Input current .................................
2 A
Operating conditions ..................... 0 to +43 °C, 10 – 80 % RH (non-condensing)
Storage conditions ........................ -20 to +60 °C, 10 – 80 % RH (non-condensing)
Dimensions (L x W x H) ................ 105 x 77 x 18 mm
Weight ..........................................
81 g
b) HDMI
Resolution ..................................... 4K @ 60 Hz
Bandwidth ..................................... 18 Gbps
Frequency ..................................... 25 – 600 MHz
HDCP compliant ...........................
Yes
Audio compliance ......................... DTS HD, Dolby TrueHD
Video support ............................... Full HD (12 bit), Full 3D, 4K2K
Cable length ................................. max. 3 m
c)
USB-C
TM
Mirror/Extend source screen ........ 1080p or UHD (3840 x 2160) at 60Hz
Charging output ............................ 5 V/DC, max. 1.5 A
Operating system support ............ Android:
min. 9.0
iOS:
min. 13
Windows
®
: min. 8
MacOS:
min. 10.6.6
d) Power adapter
Input voltage/current ..................... 100 – 240 V/AC, 50/60 Hz, 0.5 A
Output voltage/current .................. 5 V/DC, 2 A
