• Always lay the cables so that nobody can trip over or become entangled in them. This poses
a risk of injury.
• For safety reasons, disconnect the power adapter from the mains socket during storms.
• Before plugging in the device, verify that the information on the product’s rating plate
correspond with your household power supply.
• The power adapter is designed in protection class II. Only a proper mains socket (230 V/AC,
50 Hz) of the public supply net must be used as voltage source.
• Do not touch the mains adapter if there are any signs of damage, as this may cause a fatal
electric shock! Switch off the mains voltage to the socket containing the power adapter (switch
off at the corresponding circuit breaker or remove the safety fuse, and then switch off at
the corresponding RCD protective switch). You can then unplug the mains adapter from the
mains socket. Dispose of the faulty mains adapter in an environmentally friendly manner and
discontinue use. Replace it with a power adapter of the same design.
• Never pour liquids over electrical devices or place objects filled with liquid next to the product.
If liquid or an object does enter the interior of the device, power down the respective socket
(e.g. switch off the circuit breaker), and then remove the mains plug from the mains socket.
Discontinue use and take the product to a specialist repair centre.
• Never use the product immediately after it has been brought from a cold room into a warm
one. The condensate generated can possibly destroy the product. The mains adapter may
also generate a fatal electric shock! Allow the product to reach room temperature before
connecting it and putting it to use. This may take several hours.
b) Batteries
• Check that the batteries are inserted with the correct polarity.
• Batteries should be removed from the device if it is not used for a long period of time to
avoid damage through leaking. Leaking or damaged batteries might cause acid burns when
in contact with skin, therefore use suitable protective gloves to handle corrupted batteries.
• Batteries must be kept out of reach of children. Do not leave batteries lying around, as there
is risk, that children or pets swallow them.
• All batteries should be replaced at the same time. Mixing old and new batteries in the device
can lead to battery leakage and device damage.
• Batteries must not be dismantled, short-circuited or thrown into fire. Never recharge non
rechargeable batteries. Danger of explosion!
Product overview
Input3
Input2
Input1
Select
Power
IR
DC 5V
Input2
Input1
Input3
Output
Best.-Nr.
1712301
Seitenansicht
Seitenansicht
Rückseite
Vorderseite
Item no.
1712301
Back
Side view
Side view
Front
DC 5V
Input1
Input3
Input2
Input4
Input5
Output
Input5
Input4
Input3
Input2
Input1
Select
Power
IR
Best.-Nr.
1712300
Seitenansicht
Seitenansicht
Vorderseite
Rückseite
Item no.
1712300
Back
Side view
Side view
Front
1 HDMI input
Input 1-3
or
1-5
2 HDMI output
Output
3 LED indicator light
Input 1-3
or
1-5
4 IR sensor
5
Select
button
6 LED power light
Power
7 Low voltage socket
DC 5 V
Operating instructions
HDMI Switch 4K @ 60 Hz
Item no. 1712300 - 5 x 1 HDMI Switch
Item no. 1712301 - 3 x 1 HDMI Switch
Intended use
The product is used to connect multiple HDMI source devices such as Blu-Ray or DVD players, game
consoles, tablets, etc. via HDMI cable connections to an HDMI monitor or projector. The input signal to be
displayed can be selected manually with a button on the product or with the supplied infrared remote control.
In addition, the product has an intelligent function. The product responds automatically as soon as the power
supply of the source device is turned on. Power is supplied to the product via the supplied power adapter.
This product is intended for indoor use only. Do not use it outdoors. Contact with moisture (e.g. in bathrooms)
must be avoided under all circumstances.
For safety and approval purposes, you must not rebuild and/or modify this product. Using the product for
purposes other than those described above may damage the product. In addition, improper use can cause
hazards such as a short circuit, fire or electric shock. Read the instructions carefully and store them in a safe
place. Only make this product available to third parties together with its operating instructions.
This product complies with statutory, national and European regulations. All company and product names are
trademarks of their respective owners. All rights reserved.
HDMI is a registered trademark of HDMI Licensing L.L.C.
Package contents
• HDMI switch
• Power adapter
• Remote control incl. CR2025 button cell
• Operating instructions
Up-to-date Operating Instructions
Download the up-to-date operating instructions at www.conrad.com/downloads or scan the QR code shown.
Follow the instructions on the website.
Explanation of symbols
The symbol with the lightning in a triangle indicates that there is a risk to your health, e.g. due to
an electric shock.
The symbol with an exclamation mark in a triangle is used to highlight important information in
these operating instructions. Always read this information carefully.
The arrow symbol indicates special information and advice on how to use the product.
Safety instructions
Read the operating instructions carefully and observe safety instructions. If you do not
follow the safety information and information on proper handling in these operating
instructions, we will assume no liability for any resulting personal injury or damage to
property. Such cases will invalidate the warranty/guarantee.
a) General information
• The device is not a toy. Keep it out of the reach of children and pets.
• Do not leave packaging material lying around carelessly. This may become dangerous playing
material for children.
• Protect the product from extreme temperatures, direct sunlight, strong jolts, high humidity,
moisture, flammable gases, vapours and solvents.
• Never expose the product to mechanical stress.
• If it is no longer possible to operate the product safely, stop using it and prevent unauthorised
use. Safe operation can no longer be guaranteed if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stress.
• Please handle the product carefully. Jolts, impacts or a fall even from a low height may
damage the product.
• Always observe the safety information and operating instructions of any other devices which
are connected to the product.
• Consult a technician if you are not sure how to use or connect the product, or if you have
concerns about safety.
• Maintenance, modifications and repairs must be carried out by a technician or a specialist
repair centre.
• If you have questions which remain unanswered by these operating instructions, contact our
technical support service or other technical personnel.
• The mains outlet must be located near to the device and be easily accessible.
• Only power the product using the mains adapter provided. Only connect the power adapter to a
standard mains socket connected to the public grid. Before plugging in the power adapter, check
whether the voltage stated on the power adapter complies with the voltage of your electricity supplier.
• Never connect or disconnect power adapters if your hands are wet.
• Never unplug the mains adapter from the mains socket by pulling on the cable; always use
the grips on the plug.
• When setting up the product, make sure that the cables are not pinched, kinked or damaged
by sharp edges.
