User manual
EXPERT 2K-FA
Pag. 8 of 8 Issue 2 – May 2011
1. PANEL DESCRIPTION
1.1 Front Panel
1)
ON
2)
OFF
3)
DISPLAY
switches between display pages.
4)
POWER
switches output power from “MAX / MID / LOW“.
5)
OPERATE switches
between Standby / Operate.
6)
SET
used to program the amplifier.
7)
▼►
used to program the amplifier.
8)
◄▲
used to program the amplifier.
9)
INPUT
selects one of the two inputs of the amplifier.
10)
◄
BAND
switches bands manually (downward in frequency).
11)
BAND
►
switches bands manually (upward in frequency).
12)
ANT
switches the antennas for every single band
13)
CAT
shows the current CAT interface setting.
14)
TUNE:
starts the automatic tuning process.
15)
◄
C
used for manual tuning.
16)
C
►
used for manual tuning.
17)
◄
L
used for manual tuning.
18)
L
►
used for manual tuning.
19)
TX
red led, illuminates during transmission.
20)
OP
yellow led, illuminates when the amplifier is in “Operate” state.
21)
ON
green led, illuminates when the amplifier is “ON”.
22)
SET
green led, illuminates during programming.
23)
TUNE
yellow led, illuminates during tuning.
24)
ALL
red led, illuminates when there is an alarm.
25)
DISPLAY
26) AIRFLOW GRID