User’s manual
EXPERT 1K-FA
Pag. 23 of 76
10. PROGRAMMING
The three [SET], [
◄▲
] and [
▼►
] keys, underlined with an orange line, permit
programing the amplifier and they can used in the following way:
[SET]
Use it to open the menu page, to validate the choices and to exit from
the menu page.
[
◄▲
], [
▼►
] Use these to select the options.
A green led illuminates during the programming process.
To program the system is very easy. You will find your programming choices confirmed
by the items shown at the lower part of the display.
Note:
programming is only possible in ‘STANDBY’ mode.
Note:
programming changes take effect only after exiting from the menu page (the green led
turns off).
10.1 Ways to operate
Pressing the [SET] key opens the menu page. On the display there are the following
options:
a) ANTENNA
An appropriate antenna may be assigned to each band selecting
the (ANT 1, ANT 2, ANT 3, ANT 4) connector.
If you don’t have an antenna for a particular band, input “NO“.
This setup allows to preset up to two antennas for the same band.
Both antennas can be switched using the [ANT] key while working
either in “OPERATE” or in “STANDBY” mode.
