Spartan Equipment SKID-PAC 1000, Technical Manual

Page: 36 / 48

Spartan Equipment Technical Manual Skid-Pac
TM
1000, 1000B
26
SECTION 13.0
PARTS INFORMATION
IMPORTANT
Non-approved parts may cause loss of
performance or Skid-Pac damage. Use
only genuine Spartan Equipment
replacement parts to protect total
warranty coverage.
NOTE : Check that the model number of
your Skid-Pac corresponds to the one
given in Section 1 of this manual.
13.1 General
This section contains spare parts
information for the Spartan Equipment
Skid-Pac model described in Section 1.
When ordering parts, it is important to note
that components used in the assembly of
the Skid-Pac, such as the top mounting
frame, dynamic assembly, compaction
plate, motor and flow regulator valve, can
vary.
The illustrations and parts descriptions
contained in this manual are typical of the
model identified in Section 1 of this manual.
When viewing the parts illustrations and
descriptions, verify that the model
description and serial number of the
assembly is correct for your Skid-Pac.
To order replacement parts, Spartan
Equipment recommends contacting the
dealer from which the equipment was
purchased. Components, such as the top
mounting frame, eccentric housing,
compaction plate, motor and valve, are
available in optional configurations.
Therefore, the model and serial number
must accompany all inquiries pertaining to
installation, service, maintenance and spare
parts.
To expedite the ordering process and
ensure accuracy, please provide your
dealer with the following information-
Product name - Ho-Pac
Model number
–
Skid-Pac 1000,
1000B
Serial number
–
See Section 2
Description of the part
Part number
Quantity