Spartan Equipment Angle Broom, Owner'S/Operator'S Manual

Page: 16 / 21

Troubleshooting
Problem Cause Resolution
Skid steer hydraulic oil Leak between skid steer Investigate & repair
level goes down during and attachment motor
operation or cylinder
Leaks in skid steer Investigate & repair
hydraulic system
Hydraulic angle does not Valve not shifting due Shut off skid steer and release
move (Hyd. Angle Models to solenoid failure pressure
in
the auxiliary
Only) circuit. Remove the shift
cartridge and check if a
contaminant is blocking the
valve action. Check if solenoid
coil is working.
Solenoid valve not Verify that the 12V positive
receiving signal from lead is connected to a live
switch
in
cab circuit and that the ground
circuit is good.
Disconnected or shorted wire
in wire harness, solenoid
valve or harness coupler.
Malfunctioning solenoid valve
cartridge.
Broom does not turn Incomplete circuit to Either one of the hydraulic
and from motor couplers is not fully engaged.
Disconnect and reconnect
hoses to machine.
Motor contaminated Drive motor failure. Replace
motor after flushing/cleaning
hose interiors.
Spartan Equipment
PAGE 15
Angle Brooms June 2014