DRAFT
13
2.
The green light on the front of the camera should flash
for a few seconds to give you time to move out of the
area. If it continues to flash for more than a few seconds,
you have left the camera in
SETUP
mode rather than
turning it
ON
.
3.
Important
: When you are ready to retrieve the SD card or
change the settings, turn the camera off first by pushing
the power switch to the OFF position. (Even in the OFF
mode, the camera still consumes a small amount of
battery power. You should remove the batteries if the
camera is not in use for an extended time.)
Complete Camera Setup on the Portal
Complete these steps on the portal to finish the GoWireless
Premium setup. Some are optional.
1.
Verify that you have credits on your account: Select
MY
ACCOUNT > Credit History
and verify that you have at
least one credit. Adding a brand new camera will add a
free credit to your account.
2.
Change your camera settings:
MY CAMERAS > Camera
Settings:
a.
Confirm that the region and time zone are correct.
b.
Verify that the all the settings are correct.
c.
Consider setting some scheduled events. For example,
you may want to set events to take photos at specific
times (e.g., 9 AM and 9 PM so that you will get at least
Summary of Contents for GoCam
Page 7: ...DRAFT 2 ...
