DRAFT
6
antenna onto the antenna jack. The rubber gasket must be
in place to prevent leaks. Make sure the antenna is screwed
in all the way but be careful not to over-tighten it.
Connect the Camera to the U.S. Cellular™ Network
1.
Slide the power switch to the SETUP position. The
camera will enter
Preview
mode. The screen will display
Searching network…
, then
U.S.Cellular
will appear at
center top of the screen and the signal strength bars will
show in the top right corner.
2.
Press the
Menu
button to access the
Setup
menu.
3.
Navigate to the
Wireless
tab (far right), then down to
Diagnostic
using the buttons:
Press
or
to move among the tabs (submenus).
Press
or
move among the submenu items.
Press
or
to change the value for an item.
Press
OK
to save all changes you’ve made to in a
particular tab.
Press
Menu
return to the main menu (tabs) or to exit
Setup
mode (back one level).
4.
With
Activate
highlighted, press the
OK
button.
A pop up box will show
Dialing *228, Please Wait...
Then you’ll see a message that says:
Successful!
Restarting. Please wait.
Summary of Contents for GoCam
Page 7: ...DRAFT 2 ...
