3
Original instructions
EN
II - Technical specifications
Model
BR2 7.2Li HD
▪
Motor
V
7.2
▪
No load speed (1st gear/2nd gear)
min
-1
0-190/0-600
▪
Max. torque
Nm
13
▪
Torque control settings (number of positions)
19+1
▪
Keyless chuck capacity
mm
0.6-6
▪
Drilling capacity in steel / wood
mm
4 / 6
▪
Wood screw max. diameter
mm
6
▪
Electronic trigger speed control, left - right run
Yes
▪
Electric brake
Yes
▪
Auto spindle lock
Yes
▪
LED work area light
Yes
▪
LED charge indicator
Yes
▪
Two-speed gear
Yes
▪
Weight (incl. battery pack) (EPTA procedure 01/2003)
kg
0.7
NOISE AND VIBRATION INFORMATION
(Measured values determined according to EN 60745.)
▪
Noise emission
A-weighted sound pressure level L
pA
dB(A)
60
Uncertainty К
pA
dB
3
A-weighted sound power level L
wA
dB(A)
71
Uncertainty К
wA
dB
3
Wear hearing protection!
▪
Vibration emission *
Total vibration values (vector sum in the three axes) determined according to EN 60745:
Vibration emission vallue a
h,D
m/s
2
0.7
Uncertainty К
h,D
m/s
2
0.15
* The vibration emission values are determined according to 6.2.7 EN 60745-1
BATTERY (Li-Ion):
▪
Voltage
V
7.2
▪
Capacity
Ah
1.3
CHARGER
▪
Input:
Voltage / frequency
V~Hz
230~50
Consumption
W
32
▪
Output voltage / current
V/A
8 / 3
▪
Charging time
min
30
The vibration emission level given in this information sheet has been measured in accordance with a
standardised test given in EN 60745 and may be used to compare one tool with another. It may be used
for a preliminary assessment of exposure.
The declared vibration emission level represents the main applications of the tool. However if the tool is
used for different applications, with different accessories or poorly maintained, the vibration emission may
differ. This may significantly increase the exposure level over the total working period.
An estimation of the level of exposure to vibration should also take into account the times when the tool is
switched off or when it is running but not actually doing the job. This may significantly reduce the exposure
level over the total working period.
Maintain the power tool and the accessories and keep your hands warm during operation to reduce the
harmful effect of vibrations.
pages BR2-7.2LiHD.indd 3
9.11.2011 г. 09:43:13 ч.
