manualshive.com logo in svg

Sparklan WRTR-300, User Manual

Share
Download
Sparklan WRTR-300 User Manual Download Page 7

 

 

 

User’s Guide  

6 

3. Hardware Installation 

Front Panel 

The front panel provides LED’s for device status. Refer to the following table for the meaning of each feature. 

 
 
 

 

 
 
 

Power

 

The 

Power 

LED lights up and will keep while the Router is powered on. When the Router goes through 

its self-diagnostic mode during every boot-up, this LED will flash. When the diagnostic is complete, the 
LED will be lit continuously.

 

DMZ

 

The 

DMZ 

LED indicates when the DMZ function is being used. This LED will remain lit as long as DMZ 

is enabled.

 

WAN

 

The 

WAN 

LED lights up when there is a connection built through the Internet port.

 

WLAN 

The 

WLAN 

LED flashes when there is a successful Wireless connection.

 

Ethernet

 

LED 1, 2, 3, 4

. These numbered LEDs, corresponding with the numbered ports on the Router’s rear 

panel. If the LED is continuously lit, the Router is successfully connected to a device through that port. 
A flashing LED indicates network activity over that port. 

 

 
 

Summary of Contents for WRTR-300





































Reviews:

No comments

Brands by name

Popular brands

Load more brands