manualshive.com logo in svg

Sparklan WRTR-300, User Manual

Share
Download
Sparklan WRTR-300 User Manual Download Page 36

 

 

 

          

 

                                                                                                                                                     
                                                                                                                                             

                                                                                                                                                                      

User’s Guide  

35 

6. I can’t access the AP from a wireless client. 

 

Answer: 
 

Generally to make the wireless client unable to access AP with following possible issues: 
1. Settings are not the same among each wireless adapter. 
2. Out of range. 
3. IP Address is not set correctly. 
 
Resolution: 

Make sure that the mode, SSID, Channel and encryption settings are set the same on each wireless adapter. Make 
sure that your computer is within range and free from any strong electrical devices that may cause interference. 

 
 

7. What devices cause interference?

 

Answer: 

The  Router is  operating in the unlicensed 2.4 GHz band. Other  devices operates  in this frequency range that may 
cause interference include microwave ovens and 2.4 GHz portable phones. PCs or analog cellular phones do not 
operate at 2.4 GHz and do not cause interference. Proper placement of access points usually eliminates interference 
problems created by other 2.4 GHz devices. 

 
 

Summary of Contents for WRTR-300





































Reviews:

No comments

Brands by name

Popular brands

Load more brands