manualshive.com logo in svg

sparkfun WIG-13660, Manual, Page: 29 / 32

Share
Download
sparkfun WIG-13660 Manual Download Page 29

The SparkFun Tsunami Qwiic Arduino Library in the Arduino library manager. Click to enlarge)

Users can install this library through the Arduino Library Manager. Search for 

SparkFun Tsunami Qwiic Arduino

Library

 and you should be able to install the latest version. Users who prefer manually downloading the libraries

from the GitHub repository, can download it here:

DOWNLOAD THE SPARKFUN TSUNAMI QWIIC ARDUINO LIBRARY

The utilization of this library mimics the serial control version to allow users to easily transition between the two.
For more details on how to use this library, users can check out the documentation from the serial control library
and the Tsunami user guide.

Tsunami Qwiic Arduino Library Example

Note:

 If users experience problems with the audio output to their headphones, there are different headphone

connector standards that might be the issue. If that is the case, users only need to swap the connection from

SLEEVE

 pin on TRRS 3.5mm breakout board to the 

RING2

 pin.

  

Two of the more common variations of the headphone jack connection standards. (Click to enlarge)  

Source: quora.com

Once you've got the Qwiic version of the library installed, open the 

Example 01 PlayFile

 sketch. You can find it

under

File > Examples > SparkFun Tsunami Super WAV Trigger Qwiic > Examples 

Then load it onto your RedBoard Plus or Uno. Open your favorite Serial Terminal to see the debug output and
trigger the board to reset.

Summary of Contents for WIG-13660

































Reviews:

No comments