Example of a filename trigger mapping. (Click to enlarge)
In the example above, the firmware on the Qwiic Tsunami will correspond the filenames of the 16 files numbered
001 to 016 to each of the trigger inputs by default. The triggered
*.wav
files would be output on the first audio
channel (
1L
).
Initialization File
Note:
When creating an intialization
*.ini
file with the configuration tool, users should make sure to select
the proper settings for the firmware on the Qwiic Tsunami. By default, the Qwiic Tsunami factory programmed
firmware is configured for the
mono
setting and the configuration tool settings should match the image below:
. (Click to enlarge)
Below is a comparison of the configuration tool appearance between the mono and stereo settings. Users will
notice that some of the audio channel output options are greyed-out in the stereo setting.
The stereo setting option for the configuration tool. (Click to enlarge)