manualshive.com logo in svg

sparkfun WIG-13660, Manual, Page: 23 / 32

Share
Download
sparkfun WIG-13660 Manual Download Page 23

For the examples in the following section, users will need to prepare their card with the demonstration files we
provide.

1. Download the example files using the link below.

DEMO TSUNAMI FILES (.ZIP)

2. Unzip the folder and put the files on the root directory of the card.
3. Verify the files on the µSD card.

Files on the card

Hardware Assembly

Basic Operation

The basic operation of the Qwiic Tsunami only requires the use of the trigger pins to interact with the board. For
the example in the next section, users must insert their configured µSD card with 

*.wav

 files and connect their

headphones to the Qwiic Tsunami.

Inserting the µSD Card

Inserting the µSD card, prepared from the previous section, is straight forward. The µSD card slot contains a
spring-loaded locking mechanism:

Insert the card and press in to lock the card into the slot.
Press in to unlock and remove the card from the slot.

The inserting an µSD card into the Qwiic Tsunami.

Connecting the Headphone Jack

Note:

 If users experience problems with the audio output to their headphones, there are different headphone

connector standards that might be the issue. If that is the case, users only need to swap the connection from

SLEEVE

 pin on TRRS 3.5mm breakout board to the 

RING2

 pin.

Summary of Contents for WIG-13660

































Reviews:

No comments