When you click on “ADD AN ACTION”, you’ll see a greater variety of
options than you did with the Sound Board. The first four allow for input
signals from external boards to be combined or changed in some way,
while the bottom four require no external hardware to use. Choose
“Random Input” from the list.
There are only two blanks here: one for channel number, and one for
timing. Basically, this action flips a coin every few seconds (how often is
determined by the value in the blank) and outputs the result to the channel
you set in the blank field. Put ‘0’ in the channel number field and ‘10’ in the
“every ___ seconds” field.
Now, click the “GO BACK” button at the bottom of the screen to return to
the main menu.
Page 11 of 16
