b
19
Repairs can be made only by the manufacturer or a manufacturer-
authorized person.
Magnum-X round slings should no longer be used if, for example:
- the label is missing and the manufacturer is unknown,
- the round sling’s load-bearing core encased by the tube sleeve is damaged,
- the tube sleeve and/or core have been damaged by the effects of heat
(such as welding beads),
- the fabric has been damaged by acid or lye. Magnum-X round slings
can be disposed of with household waste as long as the fabric has
not been contaminated with oils, raw materials, etc. If the fabric has
been contaminated by chemicals, Magnum-X round slings must be
disposed of as special waste.
4.2 Cleaning
When cleaning dirty Magnum-X round slings, please note the following:
– Clean with water only; if necessary in combination with a mild and
neutral detergent. Do not use acids or alkalis!
– Magnum-X round slings should be air-dried before further use and
stored in well-ventilated rooms, without aids or direct sunlight.
– Do not use heat sources for drying!
5 Storage and cleaning
Maintenance and proper storage prolong the quality and functionality of
SpanSet Magnum-X round slings. Therefore, inspect the Magnum-X round
slings after each use! Damaged Magnum-X round slings must be removed
from use or repaired, and soiled Magnum-X round slings must be cleaned
before they are put into storage (see 2 Safety instructions and handling).
Keep the Magnum-X round slings clean, dry and well ventilated, and
protect them from direct sunlight and the effects of chemicals.
6 Training and important things to know
SpanSet Magnum-X round slings fully meet the requirements of BGR 500,
1492-2, EC machine guideline 2006/42/EC, as well as ZH 1/324 and BGI 556.
Please note that the standards and guidelines listed are only examples. Please
be aware that specific industries and applications may have special safety
