14
4.6 Three Phase Protection
If the phases are connected in the wrong order due to electrical mis-wiring, this protection
system will interrupt the power supply to prevent damage to the unit. There will be an EE 4
error code on the display.
5. Installation
5.1 Recommended Air Flow Requirements
• The series of heat pumps must be located outside in a clean area where air flow will not
be restrictive. The heat pump must be located external to the spa pool cabinet to allow
sufficient air flow for optimum efficiency.
• The heat pump must operate with a clean air supply so should be situated away from
vegetation and obstacles.
WARNING:
The heat pump MUST be installed according to the air space requirements
shown in Figure 1. Failure to follow these instructions may
VOID WARRANTY.
Summary of Contents for Power Smart SHP-100
Page 23: ...23 ...
