15
5.2 Location of the Unit
Select a suitable location in accordance with below notes and consult the local swimming
pool safety regulations to check requirements for proximity to other equipment.
Install on wall
Install on ground
Install on stand
IMPORTANT: Installation location notes
1. The heat pump must be installed on
a flat, solid and large enough base to
properly secure the heat pump. Whilst
it can be mounted on brackets or stands
a level concrete base is preferred.
2. If installing the heat pump in a harsh
climatic area (i.e. sub-zero temperatures,
snow, humidity), it is recommended to
raise the unit 50cm above the ground.
3. During installation, ensure sufficient free
space is left around the heat pump for
future maintenance.
4. The unit is air cooled. It must be
installed outdoor in an area with
sufficient clearance to provide enough
air circulation through evaporator.
5. DO NOT install heat pump in a confined
space to prevent recycling of air.
6. The fan should not blow towards
windows, walls or spaces likely to be
inhabited by people or animals.
Summary of Contents for Power Smart SHP-100
Page 23: ...23 ...
