9
2.
IMPORTANT!
ONCE POLE SECTIONS ARE ASSEMBLED - THEY CANNOT BE TAKEN APART !
3
2
4
TOP
MIDDLE
BOTTOM
Align poles using
alignment marks.
First, assemble top (2)
and middle (3) poles together by bouncing them on a scrap
piece of wood on the ground as shown in
FIG A
. until the top
pole (2) moves to the 2 1/2 inch (6,4 cm) mark you previously
made on the middle pole (3).
THEN
add bottom pole (4) and
assemble in the same way, until the middle pole moves to the
2 1/2 inch (6,4 cm) mark you previously made on the top of the
bottom pole (4).
FIG A.
middle pole
middle pole
IDENTIFICATION
STICKER
2 1/2”
(6,4 CM)
WHEN PROPERLY
ASSEMBLED, THE POLES
SHOULD HAVE A 2-1/2”
(6,4 CM) OVERLAP.
CAUTION!
IDENTIFICATION
STICKER
2 1/2”
(6,4 CM)
alignment mark
alignment mark
scrap wood
(Not Supplied)
