Assemble the Elevator Mount
8
Assemble the Elevator Mount
Required Parts:
#1 U-Bolt, Round 3/8-16 x 4 .68
#2 Clamp, Saddle
#3 Bolt, Hex Head, 5/16-18 x
1-1/4”
#8 Locknut, Hex Head, 1/2-13
#9 Washer, Flat, 5/16
#10 Washer, Flat, 1/2
#11 Locknut, Nylon Insert, 5/16 #17 Bracket, Pole
#18 Bracket, Jack Support,
RIGHT
#19 Bracket, Jack Support, LEFT #23 Struts, Board Support
#26 Bracket, Angle, RIGHT
#27 Bracket, Angle, LEFT
#29 U-Bolt, Square, 1/2-13 x 5
#33 Locknut, Nylon Insert,
3/8-16
#34 Washer, 3/8
WARNING
IF YOUR SYSTEM IS EQUIPPED WITH AN ACRYLIC BACKBOARD, EXAMINE THE BACKBOARD FOR ANY DAMAGE THAT
MAY HAVE OCCURRED DURING SHIPMENT. CRACKS IN THE BACKBOARD COULD RESULT IN SUDDEN BREAKAGE. IF
BACKBOARD IS DAMAGED IN ANY WAY PRIOR TO OR AFTER ASSEMBLY, CALL TOLL-FREE NUMBER: U.S.: 1-800-558-5234;
CANADA: 1-800-284-8339; WWW.SPALDING.COM.
NOTE
Sections A-D are options for elevator mounting.
Poles and mounting locations will vary.
Follow instructions that are packaged with elevator mount for specific assembly details.
A - Completed Elevator Mount to a Square Pole:
Summary of Contents for 316SP
Page 23: ... 23 ...
