Assemble the Elevator Mount
14
D
INSTALL THE ELEVATOR MOUNT TO A FLAT OR ANGLED ROOF
3.
Note position of angle brackets (26 & 27) in relation to pole bracket per style roof.
#26 & #27
#26 & #27
#23
#23
4.
Keep assembly upright and position struts
(23) on desired location on roof approx. 26”-
30” (66-76 cm) apart. Level in all directions.
Mark and drill holes. Secure struts in place..
#23
WARNING
USE CAUTION; ASSEMBLY IS HEAVY. TWO CAPABLE ADULTS REQUIRED FOR THIS PROCEDURE. FAILURE TO FOLLOW THIS
WARNING COULD RESULT IN SERIOUS INJURY AND/OR PROPERTY DAMAGE.
MINIMUM DISTANCE SHOULD BE 106-3/4” (2.71 M) FROM TOP ELEVATOR HOLE TO PLAYING SURFACE. HOMEOWNER
MUST ASSUME ALL RESPONSIBLILTY FOR ANY PERSONAL OR PROPERTY DAMAGE IF BACKBOARD HEIGHT IS LOWER
THAN RECOMMENDED.
NOTE
To achieve 106-3/4” (2.7 m) you may have to make some adjustments such as moving angled brackets backward or
adding height to the entire assembly with wood between angled brackets and roof.
Summary of Contents for 316SP
Page 23: ... 23 ...
