HD Digital Signal Meter Spacetronik STC-33 Combo – User manual
5 / 23
to help you to learn the locked signal well. User can edit the satellite position and transponder in
Satellite Edit menu.
How to measure terrestrial signal:
1.
Connect the signal cable to IEC-Type, Female jack first.
2.
Make sure set Antenna Power to ON in System Setting menu if your antenna needs power
supply.
3.
Analyze the signal in Terrestrial Measure menu.
4.
Analyze the scope in Scope menu and the spectrum in Spectrum Chart menu.
How to measure cable signal:
1.
Connect the signal cable to IEC-Type, Female jack first.
2. Analyze the signal in cable Measure menu.
3.
Analyze the TILT in TILT menu and the spectrum in Spectrum Chart menu.
Please refer below descriptions if you want to learn all functions.
4.
H
OME MENU
The meter will enter this menu first during power on. Press
[
/
] to switch items or [OK] to enter submenus.
DVB-S/S2:
Submenu for DVB-S/S2 system.
DVB-T/T2:
Submenu for DVB-T/T2 system.
DVB-C:
Submenu for DVB-C system.
System Setting:
Submenu for system parameters setting. Such as language, auto
power off and so on.
5.
DVB-S/S2
The submenu for DVB-S/S2 functions. User can read the parameters of the live signal, analyze the
spectrum chart, calculate the angles for a special satellite, edit the parameters of satellites and
monitor DiSEqC command for other DVB-S/S2 device.
5.1
S
ATELLITE
F
INDER
The device will show the strength and quality of the live
signal. And also CBER,VBER,LBER,CNR, modulator type,
FEC and power level
