HD Digital Signal Meter Spacetronik STC-33 Combo – User manual
13 / 23
User need to adjust the attitude of the meter according BLUE arraw on the screen. The meter will
deep and the RED icon turns to GREEN if the RED icon closes to the YELLOW one. It is better to make
the two icon overlapping. And also values of azimuth and elevation will refresh on time according to
the current position during the whole process.
Select Compass and press [OK] to go to compass submenu. And the menu as bellowing figure.
5.6
D
I
SE
Q
C
M
ONITOR
Connect other device, such as STB(DVB-S/S2 receiver), by the cable line to the LNB input
port . Then the meter analyzes all input commands for DiSEqC or switch on this menu, and
also shows the power supply and 22K status. The menu displays the last two commands.
Please refer to below screenshot.
